Wuxi, China · Manufacturer & exporter since 2016info@jcpipeline.com+86 18130056225
Home Products
Product ranges
Hot Tapping Machines Projects News About Contact
Home/Products/Hot Tapping Machines/Electric Hot Tapping Machines/Cordless Drill Hot Tapping Machine JC-DM50
Cordless Drill Hot Tapping Machine JC-DM50
02 · JC-DM50

Cordless Drill Hot Tapping Machine JC-DM50

Cordless Drill Hot Tapping Machine JC-DM50 cuts branches from DN15 – DN50 (1/2" – 2") into live mains up to 16 bar. A cordless drill spins the boring bar at 1,300 r/min through a bar adaptor, and one operator controls the feed by hand; a hole takes 3 – 10 min. Travel is 340 mm and the assembly weighs 15 kg, so the machine can be carried up a ladder and set on a flange and thread connection.

Key features

  • Working pressure ≤ 16 bar (PN16)
  • Tapping range DN15 – DN50
  • 340 mm boring bar travel
  • Cordless drill drive, 1,300 r/min
  • Feed set by the drill operator, 3 – 10 min per hole
  • Flange and thread connection, BS or ASME
  • Rated for water, oil, gas and steam

Lead time 25–35 working days after deposit. Test record, drawing and packing list go with every shipment. Payment: 30% T/T deposit, balance against copy of B/L.

Specifications

Tapping range1/2" – 2" (DN15 – DN50)
Tapping sizes1/2", 3/4", 1", 1-1/4", 1-1/2", 2" (DN15, DN20, DN25, DN32, DN40, DN50)
Working pressure≤ 16 bar (PN16 / 232 psi)
Working temperatureup to +200 °C
Boring bar travel340 mm
Spindle speed1,300 r/min
Feed modeManual
Feed volumeManual
Tapping time3 – 10 min per hole
Drive modeCordless drill
Connection to valveFlange and thread
Flange standardBS or ASME
Pipe mediumWater, oil, gas and steam
Pipe materialSteel, cast iron, plastic and concrete pipe
Dimensions980 × 180 × 170 mm
Weight15 kg

Typical applications

Service connections on distribution mainsMeter and fire-riser branchesBuilding water and heating lateralsDistrict water and fire mains
Product details

Overview

Cordless Drill Hot Tapping Machine JC-DM50 cuts branches from DN15 – DN50 (1/2" – 2") into live mains up to 16 bar. A cordless drill spins the boring bar at 1,300 r/min through a bar adaptor, and one operator controls the feed by hand; a hole takes 3 – 10 min. Travel is 340 mm and the assembly weighs 15 kg, so the machine can be carried up a ladder and set on a flange and thread connection.

The lightest machine in the range: one operator carries it, a cordless drill spins the bar, and a service connection is cut in under ten minutes.

Models are listed with the flange pattern they are built to: BS or ASME.

Tapping sequence

  1. Fit the tapping saddle or flange to the pipe and pressure-test the branch.
  2. Bolt the valve and the machine to the connection; check the bar is square to the pipe.
  3. Fit the pilot bit and shell cutter matched to the pipe material, then open the valve.
  4. Advance at Manual; the pilot bit centres the hole and the cutter follows through.
  5. Retract the bar, close the valve and remove the machine; the branch is ready to pipe up.

Standard scope of supply

  • Hot tapping machine JC-DM50, assembled and run-tested
  • Boring bar, 340 mm travel
  • Tapping adaptor to BS or ASME flange
  • Tool kit, seals and operating manual

Before you order

  • Pipe outside diameter, wall thickness and material (steel, cast iron, PE or concrete)
  • Working pressure and medium temperature
  • Flange standard and tapping size required — DN15, DN20, DN25, DN32, DN40, DN50
  • Cutter type: shell cutter for steel, carbide or diamond for cast iron and concrete
Model range

All models, side by side

ModelTapping range (inch)Tapping range (mm)DriveFeedFeed volume (mm/r)Boring bar travel (mm)Spindle speed (rpm)Motor power (kW)Motor voltage (V)Tapping time (min)Working pressure
JC-M503/4" – 2"DN20 – DN50ManualManual0.15 – 0.2240 / 350———10 – 20≤ 16 bar
JC-DM501/2" – 2"DN15 – DN50Cordless drillManual—3401,300——3 – 10≤ 16 bar
JC-E1002-1/2" – 4"DN65 – DN100ElectricManual3370531.1 / 1.5220 / 3808 – 20≤ 16 bar
JC-E2004" – 8"DN100 – DN200ElectricManual3500401.5220 / 3808 – 20≤ 16 bar
JC-E3004" – 12"DN100 – DN300ElectricManual3600 / 700401.5220 / 3808 – 30≤ 16 bar
JC-E40010" – 16"DN250 – DN400ElectricManual3600 / 800301.538015 – 40≤ 16 bar
JC-E50012" – 20"DN300 – DN500ElectricManual3800302.238025 – 50≤ 16 bar
JC-E60020" – 24"DN500 – DN600ElectricManual0.05 – 0.1900 / 110025438030 – 60≤ 16 bar
JC-E800-160032" – 64"DN700 – DN1600ElectricManual0.1 – 0.1516001011380100 – 240≤ 16 bar

Swipe the table sideways to see every column.

Dimensions and weights are nominal. Pressure ratings are working pressure at ambient temperature; confirm the flange standard and pipe material before ordering.

Related products

Other products in this range

Tell us the pipe, pressure and medium

Send the diameter, working pressure and what flows inside. We reply with a specification and price within one working day.

Send an inquiry →
WeChat Scan to add on WeChat JC-Leon
+86 18130056225