A new industrial park needed a 600 mm branch off the transmission main. Shutting the main meant cutting water to 12,000 households. We tapped it live, between 23:00 and 05:00, with a hydraulic machine and a mechanical tapping saddle.
The utility had already postponed the connection twice. Every option on the table involved a planned shutdown, and a DN600 transmission main in an industrial corridor cannot be emptied without warning half the district.
We surveyed the pipe at three points to confirm wall thickness and ovality, then specified a DN600 mechanical tapping saddle with a 200 mm outlet, a DN200 sandwich valve and a hydraulic hot tapping machine rated to PN16 (1.6 MPa / 232 psi). The cutter was sized for ductile iron with a cement lining.
Work started at 23:10. The saddle was installed and pressure-tested, the valve bolted on, and the machine mounted. The 200 mm hole was cut in 14 minutes. The coupon was retrieved intact, the cutter retracted, the valve closed and the machine removed by 01:40. The branch was flushed and chlorinated before the park opened at 08:00.
Send the diameter, working pressure and what flows inside. We reply with a specification and price within one working day.
Scan to add on WeChat
JC-Leon