Wuxi, China · Manufacturer & exporter since 2016info@jcpipeline.com+86 18130056225
Home Products
Product ranges
Hot Tapping Machines Projects News About Contact
Home/Products/Hot Tapping Machines/Electric Hot Tapping Machines/Electric High-Pressure Hot Tapping Machine JC-E150-H
Electric High-Pressure Hot Tapping Machine JC-E150-H
13 · JC-E150-H

Electric High-Pressure Hot Tapping Machine JC-E150-H

Electric High-Pressure Hot Tapping Machine JC-E150-H cuts branches from DN65 – DN200 (2-1/2" – 8") into live mains, with a design pressure of 20 / 50 / 100 bar and an ANSI #150, #300, #600 flange pattern. An electric motor drives the bar and the feed is manual; a pressure-equalizing valve lets the cutter be withdrawn against line pressure. Boring bar travel is 750 mm with a 40 mm boring bar; the unit weighs 20 kg and measures 1500 × 90 × 90 mm. The machine is rated for water, oil, gas and steam.

Key features

  • Design pressure 20 / 50 / 100 bar
  • Tapping range DN65 – DN200, 750 mm bar travel
  • 40 mm boring bar, ANSI #150, #300, #600 flange
  • Electric drive, manual feed
  • Pressure equalization for cutter withdrawal under pressure
  • Rated for water, oil, gas and steam

Lead time 25–35 working days after deposit. Test record, drawing and packing list go with every shipment. Payment: 30% T/T deposit, balance against copy of B/L.

Specifications

Hot tapping range2-1/2" – 8" (DN65 – DN200)
Boring bar travel30" / 750 mm
Boring bar diameter40 mm
Design pressure20 / 50 / 100 bar
Flange standardANSI #150, #300, #600
Drive modeElectric
Feed modeManual
Pressure equalizationAvailable
Pipe mediumWater, oil, gas and steam
Pipe materialSteel, cast iron, plastic and concrete pipe
Dimensions1500 × 90 × 90 mm
Weight20 kg

Typical applications

District water and fire mainsBranch tie-ins on steel and cast iron mainsPump station and plant room pipeworkService connections on distribution mains
Product details

Overview

Electric High-Pressure Hot Tapping Machine JC-E150-H cuts branches from DN65 – DN200 (2-1/2" – 8") into live mains, with a design pressure of 20 / 50 / 100 bar and an ANSI #150, #300, #600 flange pattern. An electric motor drives the bar and the feed is manual; a pressure-equalizing valve lets the cutter be withdrawn against line pressure. Boring bar travel is 750 mm with a 40 mm boring bar; the unit weighs 20 kg and measures 1500 × 90 × 90 mm. The machine is rated for water, oil, gas and steam.

Motor drive with a pressure-equalising valve, so the cutter can be withdrawn against 100 bar without losing the seal.

Models are listed with the flange pattern they are built to: ANSI #150, #300, #600.

Tapping sequence

  1. Weld or bolt the tapping flange to ANSI #150, #300, #600, water, oil, gas and steam; pressure-test the branch connection.
  2. Bolt the tapping valve to the flange and the machine to the valve outlet.
  3. Fit the shell cutter and pilot bit for the pipe material, then open the valve fully.
  4. Feed the bar at the rated feed; equalize pressure before withdrawing the cutter.
  5. Retract the bar past the valve, close the valve, release pressure and lift the machine.

Standard scope of supply

  • Hot tapping machine JC-E150-H, assembled and run-tested
  • Boring bar, 750 mm travel
  • 40 mm boring bar, #150, #300, #600 ANSI flange adaptor
  • Tool kit, seals and operating manual

Before you order

  • Pipe outside diameter, wall thickness and material (steel, cast iron, PE or concrete)
  • Working pressure and medium temperature
  • Flange standard and tapping size required — DN65 – DN200
  • Cutter type: shell cutter for steel, carbide or diamond for cast iron and concrete
Model range

All models, side by side

ModelRange (inch)Range (mm)Boring bar travelBar diameter (mm)Design pressure (bar)Flange standard (ANSI)Drive
JC-M50-H3/4" – 2"DN20 – DN5012" / 300 mm2020 / 100#150, #600Manual
JC-M100-H1-1/4" – 4"DN32 – DN10020" / 500 mm3020 / 100#150, #600Manual
JC-M150-H1-1/4" – 6"DN32 – DN15024" / 600 mm3020 / 100#150, #600Manual
JC-E150-H2-1/2" – 8"DN65 – DN20030" / 750 mm4020 / 50 / 100#150, #300, #600Electric
JC-E300-H6" – 16"DN150 – DN40050" / 1250 mm6020 / 50 / 100#150, #300, #600Electric
JC-E400-H12" – 28"DN300 – DN70074" / 1850 mm8020 / 50 / 100#150, #300, #600Electric
JC-H3006" – 16"DN150 – DN40050" / 1250 mm6020 / 50 / 100#150, #300, #600Hydraulic
JC-H40012" – 28"DN300 – DN70074" / 1850 mm8020 / 50 / 100#150, #300, #600Hydraulic
JC-H50020" – 48"DN500 – DN120074" / 1850 mm10020 / 50 / 100#150, #300, #600Hydraulic
JC-H80032" – 72"DN800 – DN180090" / 2250 mm16020 / 50 / 100#150, #300, #600Hydraulic
JC-H100032" – 120"DN800 – DN3000120" / 3000 mm20020 / 50 / 100#150, #300, #600Hydraulic
JC-H01021" – 2"DN25 – DN5012.8" / 320 mm20100#600Hydraulic
JC-H01041" – 4"DN25 – DN10022" / 550 mm25100#600Hydraulic

Swipe the table sideways to see every column.

Dimensions and weights are nominal. Pressure ratings are working pressure at ambient temperature; confirm the flange standard and pipe material before ordering.

Related products

Other products in this range

Tell us the pipe, pressure and medium

Send the diameter, working pressure and what flows inside. We reply with a specification and price within one working day.

Send an inquiry →
WeChat Scan to add on WeChat JC-Leon
+86 18130056225