Wuxi, China · Manufacturer & exporter since 2016info@jcpipeline.com+86 18130056225
Home Products
Product ranges
Hot Tapping Machines Projects News About Contact
Home/Products/Hot Tapping Machines/Manual Hot Tapping Machines/Manual Hot Tapping Machine JC-M50
Manual Hot Tapping Machine JC-M50
01 · JC-M50

Manual Hot Tapping Machine JC-M50

Manual Hot Tapping Machine JC-M50 cuts branches from DN20 – DN50 (3/4" – 2") into live mains up to 16 bar. A handwheel advances the bar at 0.15 – 0.2 mm per revolution and the travel volume is 1.5 mm/r, so a hole takes 10 – 20 min without a power supply on site. The machine mounts on a thread or flange connection, works from -20 to +80 °C and weighs 12 kg.

Key features

  • Working pressure ≤ 16 bar (PN16)
  • Tapping range DN20 – DN50
  • 240 / 350 mm boring bar travel
  • Manual drive, no power supply needed
  • Feed 0.15 – 0.2 mm/r, 10 – 20 min per hole
  • Thread or flange connection, BS or ASME (on flange version)
  • Rated for water, oil, gas and steam

Lead time 25–35 working days after deposit. Test record, drawing and packing list go with every shipment. Payment: 30% T/T deposit, balance against copy of B/L.

Specifications

Tapping range3/4" – 2" (DN20 – DN50)
Tapping sizes3/4", 1", 1-1/4", 1-1/2", 2" (DN20, DN25, DN32, DN40, DN50)
Working pressure≤ 16 bar (PN16 / 232 psi)
Working temperature-20 to +80 °C
Boring bar travel240 / 350 mm
Feed modeManual
Feed volume0.15 – 0.2 mm/r
Tapping time10 – 20 min per hole
Drive modeManual
Connection to valveThread or flange
Flange standardBS or ASME (on flange version)
Pipe mediumWater, oil, gas and steam
Pipe materialSteel, cast iron, plastic and concrete pipe
Dimensions650 × 100 × 140 mm
Weight12 kg

Typical applications

Service connections on distribution mainsMeter and fire-riser branchesBuilding water and heating lateralsDistrict water and fire mains
Product details

Overview

Manual Hot Tapping Machine JC-M50 cuts branches from DN20 – DN50 (3/4" – 2") into live mains up to 16 bar. A handwheel advances the bar at 0.15 – 0.2 mm per revolution and the travel volume is 1.5 mm/r, so a hole takes 10 – 20 min without a power supply on site. The machine mounts on a thread or flange connection, works from -20 to +80 °C and weighs 12 kg.

Fully mechanical: a handwheel advances the bar and a chain or thread mount holds the machine square, so it can be used in a flooded trench or a hazardous area.

Models are listed with the flange pattern they are built to: BS or ASME (on flange version).

Tapping sequence

  1. Fit the tapping saddle or flange to the pipe and pressure-test the branch.
  2. Bolt the valve and the machine to the connection; check the bar is square to the pipe.
  3. Fit the pilot bit and shell cutter matched to the pipe material, then open the valve.
  4. Advance at 0.15 – 0.2 mm/r; the pilot bit centres the hole and the cutter follows through.
  5. Retract the bar, close the valve and remove the machine; the branch is ready to pipe up.

Standard scope of supply

  • Hot tapping machine JC-M50, assembled and run-tested
  • Boring bar, 240 / 350 mm travel
  • Tapping adaptor to BS or ASME (on flange version) flange
  • Tool kit, seals and operating manual

Before you order

  • Pipe outside diameter, wall thickness and material (steel, cast iron, PE or concrete)
  • Working pressure and medium temperature
  • Flange standard and tapping size required — DN20, DN25, DN32, DN40, DN50
  • Cutter type: shell cutter for steel, carbide or diamond for cast iron and concrete
Model range

All models, side by side

ModelTapping range (inch)Tapping range (mm)DriveFeedFeed volume (mm/r)Boring bar travel (mm)Spindle speed (rpm)Motor power (kW)Motor voltage (V)Tapping time (min)Working pressure
JC-M503/4" – 2"DN20 – DN50ManualManual0.15 – 0.2240 / 350———10 – 20≤ 16 bar
JC-DM501/2" – 2"DN15 – DN50Cordless drillManual—3401,300——3 – 10≤ 16 bar
JC-E1002-1/2" – 4"DN65 – DN100ElectricManual3370531.1 / 1.5220 / 3808 – 20≤ 16 bar
JC-E2004" – 8"DN100 – DN200ElectricManual3500401.5220 / 3808 – 20≤ 16 bar
JC-E3004" – 12"DN100 – DN300ElectricManual3600 / 700401.5220 / 3808 – 30≤ 16 bar
JC-E40010" – 16"DN250 – DN400ElectricManual3600 / 800301.538015 – 40≤ 16 bar
JC-E50012" – 20"DN300 – DN500ElectricManual3800302.238025 – 50≤ 16 bar
JC-E60020" – 24"DN500 – DN600ElectricManual0.05 – 0.1900 / 110025438030 – 60≤ 16 bar
JC-E800-160032" – 64"DN700 – DN1600ElectricManual0.1 – 0.1516001011380100 – 240≤ 16 bar

Swipe the table sideways to see every column.

Dimensions and weights are nominal. Pressure ratings are working pressure at ambient temperature; confirm the flange standard and pipe material before ordering.

Related products

Other products in this range

Tell us the pipe, pressure and medium

Send the diameter, working pressure and what flows inside. We reply with a specification and price within one working day.

Send an inquiry →
WeChat Scan to add on WeChat JC-Leon
+86 18130056225